We inspect every piece of bearing by ourselves before delivery.
Overview
Quick Details
- After Warranty Service:
-
Video technical support
- Local Service Location:
-
Egypt
- Showroom Location:
-
Egypt
- Type:
-
parts
- After-sales Service Provided:
-
Video technical support
Supply Ability
- Supply Ability:
- 5000EPG Machinery is located in XiHu Area HangZhou Zhejiang ,China. It is 30km from our factory to HangZhou international airport. 00 Piece/Pieces per Year
Packaging & Delivery
- Packaging Details
- Carton or Plywood case
- Port
- NINGBO/SHANGHAI, CHINA
-
Lead Time
: -
Quantity(Bags) 1 – 50 >50 Est. Time(days) 15 To be negotiated
Online Customization
| BM5 TECHNICAL DATA | |||||||
| TYPE | BM5-315 | BM5-400 | BM5-500 | BM5-630 | BM5-800 | BM5-985 | |
| BM5S-315 | BM5S-400 | BM5S-500 | BM5S-630 | BM5S-800 | BM5S-985 | ||
| BM5W-315 | BM5W-400 | BM5W-500 | BM5W-630 | BM5W-800 | BM5W-985 | ||
| Displacement(ml/r) | 314.9 | 399.7 | 496.6 | 617.8 | 787.4 | 969.1 | |
| Max.Pressure.Drop(Mpa) | cont. | 20 | 20 | 20 | 18 | 16 | 14 |
| int. | 24 | 24 | 24 | 21 | 18 | 16 | |
| peak. | 28 | 28 | 28 | 24 | 21 | 18 | |
| Max.torque(N.m) | cont. | 873 | 1108 | 1385 | 1570 | 1773 | 1900 |
| int. | 1119 | 1440 | 1783 | 1951 | 2122 | 2133 | |
| peak. | 1293 | 1650 | 2060 | 2249 | 2481 | 2399 | |
| Max. Speed (cont.)(r/min) |
475 | 375 | 300 | 240 | 190 | 150 | |
| Max.Flow(cont.)(L/min) | 150 | 150 | 150 | 150 | 150 | 150 | |
| Max.Output.Power(cMaintenance Maintenance on these units is straight forward and like all moving parts these need their fair share of grease and should be greased regularly as these components work very hard and are subject to all that nature can provide for wear and tear. Good grease is essential here; put grease in until you see the old grease oozing out. Go easy on the “U” joints so you don’t blow the seals. Short bursts of a low pressured air grease gun or even better a hand pump gun will do the job and should be done based on hourly use. At least once a season the primary and secondary shafts should be separated. All debris and any rust should be cleaned off. Examine thoroughly for any signs of stress and apply a liberal amount of grease. In addition to this, both the PTO yoke holes need grease inside of them at least once a year along with the yoke lock pin.ont.)(Kw) | 32 | 32 | 32 | 32 | 32 | 24 | |
| Weight(kg) | 30.7 | 31.5 | 32.4 | 33.6 | 35.2 | 37.2 | |
