High-end form of the higher strength series
The DID HI-PWR-SHK roller chains have thicker website link plates than HI-PWR-S roller 
chains, and therefore are the highest in tensile strength and allowable load amid standard application chains, thus becoming ideal for very low velocity heavy duty transmission.
Proposed utilizes
?The HI-PWR-SHK roller chains are 25 percent increased in tensile power and 50 % larger in highest allowable load than the typical roller chains, but considering the fact that their fat is heavier, driving performance declines at high pace. So, they are really appropriate for heavy duty at low pace applications.
Multilevel parking machines, pipe benders, development machines, etc.
Choice of chains
Select a appropriate HI-PWR-SHK style chain based upon “Low-speed selection”
HI-PWR-SHK series is available in simplex.
Sprockets
Normal sprockets for multiplex chains are unable to be employed.
Connecting hyperlinks and offset backlinks
The most effective feature from the HI-PWR-SHK roller chains is high maximum allowable load. Consequently, interference-fitted connecting backlinks (H connecting back links) with very little power degradation are applied.
The connecting plate plus the connecting pins are connected with spring pins. The tensile strength of an H connecting link is equivalent to that of the chain, however the allowable load is relatively reduced than that in the chain.
HI-PWR-S type roller chains do not have any offset hyperlink. Use an even number of links.
In no way make the holes in the connecting plate larger and by no means make the pins thinner to facilitate the get the job done for fitting the pins to the connecting plate, because otherwise the fatigue strength might be lowered.
