This electrical power unit functions a long term magnet motor using a energy up gravity down circuit. Activate the start out solenoid to start out the motor to lift the machine. The lowing movement is activated from the solenoid valve with all the decreasing velocity controlled from the strain compensated flow handle valve. Items of this series could be broadly used in the industry of logistic devices such as fork lift, mini lift table, and so forth.
one. This energy unit is of S3 duty cycle, i.e.,non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all the hydraulic components concerned before installation of the energy unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which must also be clean and no cost of impurities. N46 hydraulic oil is recommended.
4. This electrical power unit is designed to be mounted vertically.
5. Check the oil degree during the tank following the 1st star with the power unit.
six. Oil shifting is required immediately after the initial a hundred operation hrs,afterwards when just about every 3000 hours.
7. More pump sizes and tank sizes are avaiable upon request.