1.A connecting link of an O-ring Chain for general application is pre-coated with grease in the pins. Prior to connection, confirm the grease within the surfaces of pins, and in case the quantity of grease is little, apply grease with bare hands. (If gloves are used, the grease might be absorbed by the gloves.)
Illustration: Once the connecting link (I) of an O-ring chain for standard application is
shipped, O-rings are fitted at the roots of your pins. Should the O-rings come loose as a result of vibration throughout transport, refit the O-rings in towards the roots of the pins.
In this case, make sure you return the grease collected with the roots from the pins on the central surfaces of your pins, additional at portion A than at portions B proven in the above illustration. (Portions A is worn on account of sliding together with the bushings.)
two.The chain can be most easily linked over the teeth of a sprocket. Engage the backlinks at both ends of your chain with all the sprocket teeth and fit connecting pins. In case the sprocket might be moved, the chain can also be linked around the loosened side.
3. Connecting procedure
one.Confirm that O-rings are attached for the roots in the pins.
two.In the event the volume of grease applied on the connecting pins is smaller, coat the pins with grease in the central portions.
3.Insert the connecting pins to the bushings in the inner hyperlinks at the two ends.
four.Confirm the grease is 
applied to the complete face of your O-ring, and match the O-ring onto the connecting pins.
5.Insert the connecting pins in to the connecting plate and whilst pressing the connecting plate, install the spring clip. Verify whether or not the head (the finish without a split) with the spring clip is turned from the feeding direction on the chain. (See the following illustration.)
six.You’ll want to confirm that the spring clip is securely fitted while in the clip grooves of the connecting pins.
This completes jointing with the connecting link. Note that grease within the surfaces of connecting pins and O-rings could be eliminated all through set up do the job. In this case, re-grease utilizing the grease on the surface on the base chain or even the grease from the polyethylene bag through which the connecting website link was contained.
