Material Handling Power UNIT one
This power unit is designed for your fork lift marketplace, consisting of very productive gear pump, DC motor, manual increase and decrease valve, tank, ect. The up and down movement are managed by the lever of your guide release valve, and that is outfitted with an electrical switch to activate the motor. The lowing pace is controlled from the pressure compensated movement manage valve.
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean every one of the hydraulic elements concerned before set up of the electrical power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which really should also be clean and free of impurities, N46 hydraulic oil is suggested .
four. Oil transforming is needed right after the original one hundred operation hrs, afterwards the moment each and every 3000 hrs.
five. The energy unit shown is built to be mounted horizontally.
Materials Dealing with Power UNIT two
This power unit characteristics electrical power up gravity down circuit. Activate the get started solenoid to begin the motor to lift the machine. The lowing motion is activated from the solenoid valve together with the lowering velocity controlled from the stress compensated movement manage valve. Solutions of this series might be broadly utilized in the marketplace of logistic devices like fork lift, mini lift table, and so on.
one. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean the many hydraulic elements concerned just before mounting the electrical power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst,which should really also be clean and cost-free of impurities, N46 hydraulic oil is advisable .
four. Oil modifying is needed following the preliminary one hundred operation hrs,afterwards when each 3000 hrs.
five. The energy unit needs to be mounted horizontally.