EP 700 Series STAINLESS Worm Gear Speed Reducers | Ever-Power Gear
The Original Stainless Reducer
The Ever-Power Gear 700 Series Worm Gear Quickness Reducer is a foundation in food and beverage applications for decades. As a innovator in worm gear technology, Ever-Power Equipment continues to improve product performance by developing innovative designs to meet up more stringent demands and anticipated tightening of federal regulations in the food and beverage industry.
Blending trusted 700 Series worm gearing with an innovative new exterior style, the stainless steel 700 series has been optimized to withstand the harshest washdown circumstances. The units feature trusted 700 Series worm gearing, a 316 stainless rounded housing with smooth uninterrupted areas made to prevent particle accumulation and pooling fluids, dual lipped shaft seals, covers for all hardware and counter bored holes.
NSF Certified Logo
Sure, a stainless Stainless steel worm reducers gearbox costs greater than a painted 1, but purchasing a more corrosion resistant gearbox saves cash and makes the most feeling over time. Unmatched product overall performance in highly caustic washdown applications coupled with first class customer support makes Ever-Power Gear your first choice for acceleration reducers and gearmotors!
Product Features
NSF International Certified
316 stainless steel housing, bearing carriers and flanges
303 stainless steel output shafts
Rounded housing eliminates virtually all flat surfaces and prevents international matter accumulation or standing up fluid
Elimination of most exposed hardware promotes clean surfaces to optimize clean down effectiveness
Lubed forever with H1 rated food quality lubricant Klubersynth UH1 6-460
Flange design incorporates jack bolt holes to facilitate easy motor-reducer separation
5:1 – 100:1 Single Reduction
100:1 – 3600:1 – Double Reduction
Motor flange design incorporates an O-ring to minimize ingress of particles or fluids
Polished matte finish maintains clean appearance throughout operation
Optional ruthless washdown seal available
Available in hollow and solid output shaft
Stainless Steel, Heavy-duty Right angle (SSHdR) series worm gearboxes are made with 304 stainless steel. All reducer areas are polished and rounded to avoid organism growth on areas. SSHdR series Hollow Output Bore reducers are available in speed ratios ranging from 5:1 to 60:1 with imperial center distances which range from 1.75 to 3.25 inches. Also, our stainless gearboxes come pre-loaded with EP meals grade lubricant.
“EP” series Flange Insight – Hollow Bore Result series stainless steel right angle worm gear reducers are stocked as completed goods with hollow output bore sizes ranging from 1” to 2-3/16” with obtainable center distances which range from 1.75 to 3.25 inches. All motor insight flanges are NEMA C-face quill style styles and each unit comes pre-filled with EP food grade lubricant. Stainless Steel bushing kits are sold separately to allow for a lot more mind shaft size configurations.
Product Features
5:1 – 60:1 ratios
Center distances ranging from 1.75 to 3.25 inches
304 stainless housing, covers and flanges
Smooth, polished areas and etched nameplate
Internal bladder functions as a breather and effectively dispels heat
Double-lipped VITON oil seals (at output)
15CrMo4 NEMA quill input with carburizing heat treatment
CuSn12Ni2 bronze alloy worm wheel with high efficiency equipment tooth configuration
RoHS plastic-type material covers supplied to fill up unused mounting slots
0-ring provided on input flange to avoid moisture intrusion
Pre-filled with Mobil CIBUS 460 H1 food grade lubricant
Interchangeability with major brands
1-year warranty
Stainless Steel (SS Series)
Grove Gear STAINLESS gear reducers offer superior corrosion security. They are rust evidence and in a position to withstand the harshest conditions. The stainless housing, cover and exterior hardware offer an exceedingly long life.
Center distances from 1.33” through 3.250”.
Six sizes available with ratings to 17 HP.
Available in single and dual reduction.
Ratios from 5:1 to 3600:1.
316 stainless steel housing and 
covers to withstand extreme environments.
Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant
Vent-free “sealed-for-life” design with Enviroseal technology.
EP double lip seals provide extended lifestyle through increased resistance to temperature, abrasion and chemicals.
O-ring on face of input flange provides a positive seal against moisture intrusion.
303 stainless steel output shaft.
Worms are cut, heat-treated, surface and polished to supply efficient, quiet operation.
All units are 100% run and leak tested at the factory to insure that you receive the best quality product.
Ultimate application flexibility with all-angle mounting provisions, the widest collection of accessory bases and flanges and the biggest selection of stock reducer styles.
Mounting dimensions are interchangeable with most industry standard reducers.
EP Stainless Steel
Right Angle / Heavy Washdown Duty STAINLESS Speed Reducer
This STAINLESS reducer is made for Heavy Duty Washdown applications and is resistant to numerous forms of wear. This is exactly what you want to use for severe environmental conditions.
STAINLESS STEEL WORM GEARBOX
Comply with HACCP and EHEDG regulations
It is becoming increasingly difficult to really get your machine to meet up the HACCP and EHEDG regulations, while your visitors vulue this more and more. The stainless worm gearbox drive system Ever-Power allows you to stay cost effective but meet tcustomer demants.
The Ever-Power stainless steel worm gearbox types are created to meet the guidelines. As a result, they are resistant to an intensive cleaning regime, is constructed of hygienic components and are also dead places, and horizontal surfaces whenever you can, avoided. Of course, the material of the products is stainless steel.
Output torques of 40Nm up to 160Nm.
Result shaft sizes of 18mm up to 25mm.
Input flanges 63B14a up to 90B5.
Reduction ratios of we=7,5 up to i=100.
Food grade oil, food quality seals and hygienic design.
Material worm wheel: Cu bronze SN12 Ni2 (UNI7013-10), material hardened steel worm shaft and ground profile ZI (UNI4760).
Belastingscapacitieiten conformity: ISO.14521, DIN.3996, BS 721, AGMA 6034, ISO 6336, DIN 3990, DIN 743, ISO 281.
STAINLESS STEEL WORM GEAR SPEED REDUCERS
◦ Right angle worm gearbox
◦ Ratio 5:1 to 60:1
◦ Size 206 to 325 (2.06″ to 3.25″ between input and output shaft)
◦ Created for heavy-duty washdown
◦ Rust free housing, flange, and shafts are perfect for food industry
◦ Ideal for tough conditions and corrosive applications
◦ Internal bladder adjusts to warmth and pressure – No dependence on a surface breather
◦ Heat-treated metal worm shaft w/ ground thread
◦ Aluminium bronze (ALBC3) worm wheel
◦ Polished matte finish
◦ High quality double lip oil seals
◦ Input flange O-band repels external moisture
◦ USDA H1 food grade lubricant : MOBIL SHC CIBUS 460
◦ Appropriate for 56C, 145TC and 182/4TC Engine Inputs
◦ Twelve months limited warranty
Ever-Power Stainless Steel S Series right-angle worm reducer is ideal for harsh washdown circumstances in food digesting or other applications with high temperature/high pressure sprays. The S Series comes standard supplied with synthetic oil for lifetime lubrication and is comprised of a stainless steel housing that is made for protection in washdown applications, also designed for multiple mounting configurations.
Hygienic stainless BJ worm gearboxes
Ever-Power provides a self-produced stainless gearbox range of high quality. The series was developed specifically for the food industry and other industries where there are continuously stringent requirements for the level of resistance of the material and the easy-to-clean style.
The gearboxes are made from a smooth stainless gear housing, they are life lubricated and may of course be supplied with oil approved for the food industry. Oil seals are standard manufactured from nitrile rubber.
To reduce the risk of bacterial growth, the look is characterised simply by smooth machined areas without unnecessary flanges, recesses and installation holes. Additionally it is possible to order the gearboxes with torque arm, side flange, totally free worm and plug-in shaft. Other modifications are performed on demand including such as stainless spindle gears.
In instances where you want a complete hygienic gear motor, we can offer the EP-gearboxes fitted with stainless AC or servo engine.
Resistant to cleaning with water under pressure
The protection of the gearboxes is IP65, and for stainless motors it really is IP66. This means that the products could be cleaned with drinking water under great pressure from all directions. To attain an overall protection of IP66 by assembly of gearboxes and motor, you must make use of a gasket of nitrile rubber for the joint. This implies that the apparatus motors are perfect for free mounting without a traditional stainless protection cover in areas where hygiene requirements are highest. Hidden resources of pollution can therefore be avoided.
The gearboxes are as standard given a center distance of 31, 42, 61 and 99 mm with gear ratios from 5:1 to 100:1 and with an output torque of up to 900 Nm.
Stainless worm gearbox
Ratios
Maximum output torque
[Nm]
Housing design
Series 31
5:1 – 75:1
13.2
Stainless steel
Series 42
5.4:1 – 75:1
57
Stainless steel
Series 61
7:1 – 100:1
208
Stainless steel
Series 79
7:1 – 60:1
337
Stainless steel
Series 99
7:1 – 100:1
891
Item selection brochures available below:
Full Integral Horsepower Product Catalog
Worm Product Selection Table
S 45 Series – 0.25 – 1HP, 97 – 450in-lbs, 17.2 – 250RPM
S 50 Series – 0.25 – 2HP, 199 – 567in-lbs, 17.5 – 250 RPM
S 63 Series – 0.25 – 2HP, 209 – 1199in-lbs, 18.6 – 250RPM
S 85 Series – 0.5 – 5HP, 666 – 2353in-lbs, 18.2 – 250RPM
Extra flange and shaft inserts obtainable and may be requested during product selection. To order, please contact Bison at 1.800.ATBISON (282.4766) and ask to talk with an Automation Professional. Online selection and ordering coming soon!
Stainless Steel Solutions
Powerful, Clean Solutions with a Stainless Reputation.
Ever-Power Drive’s stainless steel precision movement gearboxes are created for sterile manufacturing conditions. The product’s smooth surface and curved contour allows for easy cleaning and bacteria-free surfaces, ideal for meals processing and pharmaceutical applications. The merchandise is designed and ranked to IP69k providing maximum security against contaminant ingress in addition to leak free operation.
Catalogued types of Ever-Power Gear’s well-known stainless steel 700 Series speed reducers are actually available with standard 2-day delivery. Procedure improvements have yielded the industry’s best standard business lead time for stainless steel worm gear reducers.
Ever-Power Gear’s SS700 Series, the original “domed crown” stainless steel reducers, are designed for maximum corrosion level of resistance and superior efficiency in high-pressure food digesting and packaging washdown applications.
A convenient after hours/holiday hotline is also designed for emergency orders. Catalogued SS700 Series versions are stocked at local and regional distribution centers to ensure fast delivery.
All SS700 versions are NSF Certified and have many maintenance-friendly features including electropolished exterior finish, sealed motor flange, and covered hardware. To prevent miniscule niches that may host microbial contamination, the nameplate has been laser marked to provide a smooth uninterrupted surface. A large internal oil reservoir, filled up with H1 food-grade lubricant (Klubersynth UH 1 6-460) and sealed forever, allows for an array of operating temps and extended service life.
