Our regular 700 Series – the heart of Ever-Power quickness reducer product line – has been serving industry reliably for over a decade. Its proven modular style has set the sector standard for efficiency and may be the most imitated item in today’s worm gear rate reducer marketplace. But why settle for a knock-off when you can have the original – from Ever-Power.
Specifications
11 basic solitary reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting versatility permits installation in practically any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, along with greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings are available in our eCatalog.
Ever-Power worm gearboxes possess earned a reputation to be a business benchmark worldwide. Our success originated from our relentless drive for quality with state-of-the-artwork technology, all and will be offering worm gearboxes are inexpensive prices. High versatility accorded through a wide choice of mounting choices, shaft configurations and motor interfaces, makes the Ever-Power worm gearbox the default choice for the industry. The helical-worm and the double-worm version, with or without the torque limiter, add up to the advantage, creating an extremely versatile drive system.
Ever-Power Worm gearboxes provide high torque with low quickness gear ratio. Being simple and compact in design, these gears can achieve higher gear ratio compared to the helical gears. These worm decrease gears having screw type qualities are similar to helical gears, but its helix position is typically comparatively bigger) and its body is normally quite long in the axial path. The gears in these gearboxes could be correct or left-handed dependant on the purpose.
Mounting choice include universal housing, part flanges, foot (horizontal and vertical), shaft mounted with torque arm. Obtainable in Solid shafts (one or double), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a kind of interlocking gear made up of a worm shaft and worm wheel. The worm is certainly shaped such as a screw and the worm wheel is certainly a kind of gear machined to have a tooth profile with the same configuration.
The procedure of a worm gear is similar with that of a bolt and nut. The principle is the same as a nut that is fixed to ensure that it cannot rotate and therefore progresses in the axial path when the bolt can be turned.
The look of a worm gear is thought of through the relationship between your rack and spur gear on the center plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel simply by one tooth. Due to this, in a 1 speed reduction gears, the wheel can be manufactured therefore that it will be rotated 1/60 (1/120 in unique applications).
Orthogonal shaft The shafts are aligned orthogonally because of the structure. This feature can help you layout the turning transmission direction at the right angle.
The arbitrariness of the rotation direction The screw direction of the worm could be clockwise or counterclockwise (generally clockwise). You’ll be able to change the rotation direction of the worm wheel by changing the screw path.
A wide variety of shaft layouts The wide variety of shaft layouts is one of the features of interlocking gears.For instance, right shaft output, remaining shaft output, dual shaft input and dual shaft output, etc., combine for a complete of 14 types (Body 2) and, if attachment orientations are included, it is possible to select from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is definitely characteristic because the contact can be linear and the relative slide is great. In comparison to rolling power transmission, noise and vibration are extremely low. Because of this, this technology can be used to drive medical tools, elevators and escalators, etc.
The primary specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1~1(at an input of 1800 rpm)
Output torque(N・m) 20~66
Input speed(rpm) 0~1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4~30(at an input of 1800 rpm)
Output torque(N・m) 900~3570
Input speed(rpm) 0~1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3~255(at an input of 1800 rpm)
Output torque(N・m) 50~56600
Input speed(rpm) 0~1800
Key points when selecting a worm reduction gears
Selection
When selecting a worm reduction gears, the procedures for selecting the correct gear are described in the manufacturer catalogs and the series and models ought to be selected according to those procedures. Particular care ought to be taken in essential areas such as selecting the strain index, calculating the overhang load and examining heat rated capacity from the manufacturer.
Cautions during use
When using a worm reduction gears, heat produced during the initial period of use is high and running-in procedure at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is key to sufficiently achieving the performance of the worm reduction gears.
Maintenance and inspection
After completing running-in operation (approximately 50 hours), it is necessary to change the lubricating oil and to change the lubricating oil from then on about 1 time per year according to the operation manual supplied by the manufacturer.
Product Description
The Worm Decrease Gear Box is provided by our company is of high-quality. Our products are created by using premium quality materials and advance technology at our vendors end. They are widely used in a variety of sectors. Our products are easily available at a very low market prices.
Motor Mount Frame Options
TEC Motors, worm reduction gearbox.
Option A-160 B5 Framework, Flange Mount.
Option B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Install.
High efficiency and safe operation. High load capability and overload functions. Result Torque = (Power (kW) x 9550 (Constant))/ Gearbox result speed (rpm).
Higher ratios on request reliant on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the industry worldwide. They succeeded in merging uncompromising quality with stateoftheart technology amd renown cost effectiveness.Absolute versatility is given by the wide selection of several installation options, shaft configurations and electric motor interface, all offered as standard. The helicalworm and the doubleworm edition, with or without the torque limiter, also accumulate, creating an extremely versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 level C TO 80 degree C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears come in two series: X and H.
The series X, featuring a worm and worm wheel set, is available in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell housing + coupling) offers great versatility to suit a broad range of applications and higher efficiency than the compact line XC, where the emphasis is on space effectiveness.
Series H offers the same features as series X with an extra plus: a spur gear pre-stage at the insight end provides higher efficiency and a broader range of ratios than the X series.
Body sizes 110 and 90 feature a cast-iron housing cast enbloc, whereas smaller sizes make use of die-cast aluminium housings. The worm shaft is produced from casehardened and hardened alloy steel and ground-finished.
The worm wheel has a cast iron hub with cast bronze insert. Hollow output shaft comes as standard.
Broad range of options available:
second input, result flange, single or dual extension output shaft, torque limiter with through cable, torque arm.