This standard selection of Servo-Worm Reducers are perfect for use in applications that demand high performance, precise positioning and repeatability. These were specifically developed for make use of with state-of-the-art servo motor technology, providing tight integration of the motor to the machine. Angular backlash of less than 1 arc-a few minutes is provided standard.
They can be purchased in four sizes (50 mm to 100 mm center range) with input boosts to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide selection of electric motor couplings and mounting flanges are available for assembly to virtually all servo motors, and the hollow bore output can be used to mount output shafts, pinion shafts, or other drive elements.
Standard applications for these reducers include precision rotary axis drives, traveling gantries & columns, material handling axis drives, zero-backlash axis drives and electronic line shafting. Industries offered include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors possess a torque range of 92 Nm to 520 Nm. As angular drives they are especially space-saving and reduce the expenditure for valuable installation space.
The helical-worm servo gearmotors were created so that they guarantee you a low-noise system environment. Moreover, these gearmotors provide you excellent attenuation properties for the operation of your systems with low levels of vibration. This is certainly because of the longitudinal software of drive on the input shaft. This allows torque impulses to end up being prevented efficiently and for maximum results in conditions of running smoothness and sound reduction to be performed.
Both the gear unit, and the synchronous servomotor are based on our modular program. This allows you to have completely individual configuration options for each application. One thing is certain – Our servo gearmotors are genuine specialists for very particular requirements.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, speed reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement when a equipment in the form of a screw, also called a worm, meshes with a worm equipment. These gears are usually made from bronze and the worms are steel or stainless steel.
While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other equipment reduction boxes. A major benefit of worm equipment reducers is that they generate an output that is 90° from the input and can be used to transmit higher torque or reduce rotational speed. Most often, a worm gearbox has right hand threads; to change the path of the result, a left-hand thread worm gearbox is necessary.
Sometimes a motor’s capability may be limited to the main point where it requires gearing. As servo producers develop more powerful motors that can muscle mass applications through more complicated moves and produce higher torques and speeds, these motors need gearheads equal to the task.